Student Directed Inquiry (TASC Level 3)

Page 3 of 3

Referencing

Referencing is important as this is how you acknowledge the books and other sources you have used to write an essay or conduct your research. To copy or use somebody’s work without acknowledgement, and treat it as your own, is plagiarism. It is good to use other people’s ideas, data, words and images, as well as material from the Internet, as long as you show who created the material and where you got it from.

The most important principles underpinning referencing are that you are accurate in describing the source of the information used and that you are consistent in how you interpret the referencing style.

Reference systems may differ from subject to subject so always check with your teacher about which system they would like you to use. Check the What Style Do I Use? tab below for more information.

Harvard is the default referencing style for the College. If your teacher does not specify which style to use, you should use Harvard.

Referencing Fact Sheets

Mary MacKillop Library's Referencing Fact Sheets

Artificial intelligence tools, such as ChatGPT, should be treated like any other source and need to be referenced accordingly:

Middle School

Harvard

Croagh Patrick

Harvard

Senior School

Harvard

APA 7th

MLA9

TASC has advised that students of English Literature from 2016 should now use MLA (Modern Languages Association) as the preferred referencing system. We are currently on MLA 9th edition. Additional information on MLA may be found at:

Oxford

What Style Do I Use?
Referencing Videos
Referencing FAQs
Reference Generators

What Style Do I Use?

Harvard is the default referencing style for the College. If your teacher does not specify which style to use, you should use Harvard.

A number of TASC courses prescribe specific referencing styles, as detailed below:

  • English Literature ENL315114 - MLA
  • English Studio ENS315124 - MLA
  • Psychology BHP315116 - APA
  • Sociology BHS315116 - APA
  • Sport Science SPT315118 - APA OR Harvard
  • Health Studies HLT315118 - Harvard
  • Housing and Design HDS315118 - Harvard
  • Food and Nutrition FDN315118 - Harvard

Use the most recent edition of a style unless otherwise stated.

Some courses have a suggested referencing system, to make it easier to transition to the level 3 courses listed above, or because a specific style of referencing suits the course, but may not be prescribed:

  • English Level 3 ENG315117 - MLA
  • English Applied ENA215114 - MLA
  • English Foundations ENG215117 - MLA
  • Introduction to Sociology and Psychology BHX215118 - APA
  • Chemistry CHM415115 - APA
  • Biology BIO315116 - APA
  • Physical Sciences PSC315118 - APA
  • Physical Sciences Foundation PSC215118 - APA
  • Sport Science Foundation SPT215118 - APA OR Harvard

Students undertaking the UTAS High Achiever Program are required to use the referencing system prescribed by UTAS for their course. The systems that are mainly used are the same as the systems used at the College: MLA, APA & Harvard. Some UTAS courses require you to use the Chicago or Turabian system. The Library can assist you with this style of referencing.

Referencing Videos

Middle School

The Year 7 & 8 referencing videos can be accessed here. These videos talk through the referencing process at an appropriate level for Middle School students.

Referencing FAQs

This section looks at some general answers for frequently asked questions when referencing sources.

What to do if there's no author

Harvard & APA: If there is no personal author, and it's clear that an organisation created the work, then you can use the organisational name as author. Only use Anonymous or Anon. if the source clearly states an anonymous author. If there is no personal author and no clear organisational author, use the title as the first element in the reference entry and move the date to after the title.

MLA: If there is no personal or organisational author listed, omit the author and move on to the next element in the reference entry.

What to do if there's no year of publication

Harvard: If there is no year listed, use n.d. where you would normally put the year.

APA: Use (n.d.) where you would normally put the year.

MLA: Omit the year and move on to the next element in the reference entry.

What to do if there's no title (including images)

Harvard: Create a descriptive title of the work and add it in italics as the title element of the reference entry.

APA: Create a descriptive title of the work and add it in square brackets ([ ]) as the title element of the reference entry.

MLA: Create a descriptive title of the work and add it as the title of source or title of container accordingly.

Noting different editions

Harvard: If an edition is listed, add the edition number followed by edn as an additional element after the title element of the reference entry.

APA: If an edition is listed, add the edition number followed by (ed.) in brackets after the title element of the reference entry.

MLA: Use the version element to show the edition number.

Noting different formats of sources

Harvard: Add a format descriptor after the title element of a reference entry, separated by commas.

APA: Add a format descriptor after the title element of a reference entry in square brackets ([ ]).

MLA: Add a format descriptor at the very end of the reference entry in a new sentence as an unexpected type of work. This is an optional element.

What to do if there's no publisher or the publisher isn't clear

Harvard: Some works may be independently published by the author, or an organisational author may also be the publisher. Duplicate the author as the publisher. If the work isn't published by the author and there is no publisher listed, use s.n. (sine nomine) instead.

APA: Do not duplicate the author as the publisher, instead omit the publisher element. If the work isn't published by the author and there is no publisher listed, remove the reference from the reference list and either cite it in the text as personal communications, or substitute for a different reference. If it is a historical work, and there is a printer listed, it would be acceptable at the TASC level to use the printer in place of the publisher.

MLA: Use what information is provided as either publisher or other contributor. Do not duplicate the author if they are also the publishers. If there is no publisher, omit the publisher element and move on to the next element of the reference entry.

What to do if there's no location for the publisher listed

Harvard: Use s.l. (sine loco) instead.

APA: Publisher location is not an element that is used in APA.

MLA: Publisher location is not an element that is used in MLA.

Reference Generators

There are many online referencing generators you can use. All should be used with caution, as the information may not be correct and the layout and order of information may not be the one required by your teacher as set out in the referencing standard. However, generators are quick and easy to use, and they can be a way for you to save lists of resources that you use and are a great starting point for building your reference list.

Reference builders are different from generators, and are a slight improvement in reliability and accuracy. Builders provide you with a reference by using the meta-data stored in a database about the content that you are using. Builders are more often found in academic products such as journal databases and online encyclopaedia. 

Referencing generators and builders usually provide a reference in multiple styles, so make sure you select the appropriate style for your class. Make sure you also select the appropriate reference type for your source, whether it is a website, a journal or a book. Some generators also have an app available which may make it easier for you to manage your references.

For more information around referencing generators and builders read the Library factsheet here.

Reference Generators

It is very important that you always cite the references you use. This will ensure you are not accused of plagiarism and you are showing you that you understand the importance of acknowledging where you have obtained the information you have used.

You can make referencing easier by:

  • Keeping an accurate record of all the details of every source you use. You will need to have the details of the author, the title of the book or journal article, title of the journal, year of publication, page numbers, etc.
  • Making sure you understand the type of referencing system your teacher expects you to use.
  • Allowing time to create your reference list. It will take much longer than you expect, but you will get better the more often you do it.
  • Coming to the Library to ask for help!
Academic Integrity
Breaches of AI
References

Academic Integrity

The key points of the TASC Standard that apply to student academic integrity and authenticity are:

  • “ensuring the authenticity and academic integrity of work submitted for assessment - whether internal or external” and ;
  • “having procedures … to assure TASC that it can with confidence accept that, except where otherwise acknowledged, work submitted for external assessment is the work of the learner submitting it and that all sources have been properly acknowledged.”

(TASC, 2017, p. 1)

Penalties for breaches of the Academic Integrity Standard can be found in the Academic Integrity Guide for Students (TASC, 2023a, p. 1).

Plagiarism is the most commonly discussed breach of academic integrity. Plagiarism takes many forms and can happen for many reasons, such as poor time management skills, weak research or referencing skills, laziness, disorganisation, pressure to succeed, lack of confidence or knowledge, or deliberate misconduct. However, academic integrity is more than this. It covers: cheating, copying, copyright and permissions, sharing materials, working in groups, getting your work in on time, and more.

Take the time to go to the TASC website, and to read the Guide for Students, which includes a glossary to explain some of the terms used to describe academic integrity and misconduct. Reading and becoming familiar with this guide will ensure you know what is expected of you.

Student Declaration

All students studying TASC subjects are required to complete a student declaration form:

  • declaring you have read and will comply with the TASC academic integrity requirements ;
  • declaring that you have read and will comply with the TASC external assessment rules ;
  • providing an email address where TASC will send electronic results ;
  • providing a phone number in case TASC needs to contact you.

(TASC, 2024b)

In addition to this, students studying folio or externally assessed courses are required to co-sign the student folio declaration form with their teacher for that subject (TASC, 2024c). Your teacher can only co-sign this form if they genuinely believe that your work meets the standards of academic integrity required by TASC and the College.

Breaches of AI

Breaches of Academic Integrity can include but are not limited to:

  • Plagiarism, where you intentionally or unintentionally take credit for someone else’s work without referencing the original source. This could be directly copying the words that are not your own, using and paraphrasing ideas that did not come from you, or using artificial intelligence services to create the work for you, without giving acknowledgement to the original source of the information or work ;
  • Omission or inappropriate details, where details are either left out or incorrect. This could include providing false references, combining ideas from different authors without referencing all the sources, changing data in your work inappropriately, insufficient or incorrect in-text citations, or providing misleading or insufficient references, or the wrong style of referencing ;
  • Recycling, also known as self-plagiarism, where you re-use your own work without appropriate acknowledgement ;
  • Collusion, where a group of people have worked on an assignment that was designed to be completed individually, or handing in a group assignment after not doing your share of the work, and accepting the same mark as others in your group ;
  • Contract cheating, where you arrange to pay for someone else to complete your work and submit it as your own, or ask to borrow or share another person’s work to submit as your own.

(TASC, 2023a, p. 2-3, 2023b, p. 2)

Breach of Academic Integrity Task

After three strikes against a student for breaching academic integrity, the student is to complete the following task with the Head of Library and Information Services:

References

References

DECYP. (n.d.). Academic Integrity. https://canvas.education.tas.gov.au/courses/133875

Student Experience. (2022, February 28). Academic Integrity Intro Video. Flinders University. https://www.youtube.com/watch?v=A-DoLP6T1hk

TASC. (2015). Authenticity and Academic Integrity: A Guide.

TASC. (2017, June). Academic Integrity Standard. https://www.tasc.tas.gov.au/wp-content/uploads/2018/05/Academic-Integrity-Standard.pdf

TASC. (2023a, June). Academic Integrity Guide for Students (version 1.0). https://www.tasc.tas.gov.au/wp-content/uploads/2020/03/Academic-Integrity-Guide.pdf

TASC. (2023b, March). Academic Integrity Policy (version 1.0). https://www.tasc.tas.gov.au/wp-content/uploads/2023/03/TASC-Policy-Academic-Integrity.pdf

TASC. (2024a). Academic Integrity. https://www.tasc.tas.gov.au/teachers/academic-integrity/

TASC. (2024b). Student Declaration Form. https://www.tasc.tas.gov.au/students/years-11-and-12/preparing-for-exams/student-declaration/

TASC. (2024c). Folio Assessment. https://www.tasc.tas.gov.au/students/years-11-and-12/preparing-for-exams/folio-assessment/